http://www.euromines.org/mp_national_stats_france.html
Non-Metallic Mineral Resources of Germany (1945)
Mica Properties and Classification
Hyperphysics, "Dielectric constants,"
http://hyperphysics.phy-astr.gsu.edu/hbase/tables/diel.html
"Mica,", Kirk-Othmer Encyclopedia of Chemical Technology
(dielectric constant)
McCloskey, "Reliability Design Guide for High-Voltage Capacitors," http://powerelectronics.com/mag/power_reliability_design_guide/
(temperature drift)
Inderchand Rajgarhia & Sons, "Physical Properties of Mica,"
http://www.icrmica.com/icrmica_physical_properties.html
"Miscellaneous Dielectrics,"
http://my.execpc.com/~endlr/misc__dielectrics.html
(dissipation factor, temperature drift)
Eccosorb, "Dielectric Chart,"
http://www.eccosorb.com/sales/Dielectric_Chart.pdf
http://www.science.uwaterloo.ca/earth/waton/f0102.html(dielectric constant vs. loss tangent)
ASTM, "ASTM Standard Qualities of Mica, Quality Classification of Mica Based on Visual Properties,"
http://www.2spi.com/catalog/submat/chart.html
Johnson, "Lossy Capacitors,"
http://www.eece.ksu.edu/~gjohnson/tcchap3.pdf
Kuphaldt, Chapter 3, Lessons in Electric Circuits (2004)
http://ieee.uah.edu/tutorials/LiEC/Ref/REF_3.html
(dielectric strength)
"Dielectric Constant Reference Guide,"
http://www.clippercontrols.com/info/dielectric_constants.html
"Dielectric Constant, Strength, & Loss Tangent,"
http://www.rfcafe.com/references/electrical/dielectric_constants_strengths.htm
Mica History
Arthur, "History of Western North Carolina - Chapter XXV Mines and Mining" (1918), online at
http://www.ls.net/~newriver/nc/wnc25.htm
Swaveda, http://www.swaveda.com/elibrary.php?id=14&action=show&type=book
[Chennai], Government Museum Chennai, "Tanjore paintings,"
http://www.chennaimuseum.org/draft/gallery/03/01/012/tanjore5.htm
MMPIndia, "Brief Outline of Mica mining in Andhra Pradesh,"
http://www.mmpindia.org/Micamining.PDF
Hoopes, Ancient American Civilizations: Mesoamerica (1998)
http://www.ku.edu/~hoopes/506/Chronology.htm
Hofstetter, "Acropolis Plaza: Structure 6F-3",
http://maya.csuhayward.edu/yaxuna/vr3.6f3.html
Storey, Life and Death in the Ancient City of Teotihaucan: A Modern Paleodemographic Synthesis 33, 82-3, 97 (2001)
The Natural History of Pliny, Book XXXVI, Chap. 45, p. 369.
(Bostock transl.)
Pegmatites
Pegmatite Interest Group, http://www.minsocam.org/msa/special/Pig/
Capacitors
Kilowatt Classroom, "Capacitors,"
http://www.kilowattclassroom.com/Archive/CapXC.pdf
http://www.allaboutcircuits.com/vol_5/chpt_3/6.html
A Tempest In a Baptistry
by Terry Howard
The question of re-baptism and the distress it caused in the sixteen hundreds, including what has at times been described as bloody murder, is still with us.
In 1965, President Johnson's daughter Luci was re-baptized into the Roman Catholic Church. While most of the world took no notice of the event, it created a very big ripple in a very small puddle, and generated a great deal of very loud conversation amongst the few who did.
The re-baptism happened at Luci's request. It seems her request, and the resulting baptism, are now generally deemed to have been inappropriate.
Under common high church usage, the only allowable reason for re-baptizing an individual is if the original baptism was improperly conducted. An individual's own judgment and wishes should be completely irrelevant. The matter should be decided by priests and canon lawyers, without regard to the wishes of the person seeking re-baptism. Miss Johnson's request is, mostly, considered to have been out of order and her priest in error.
Why?
Because, re-baptism brings the validity of the first baptism into question.
In an age when many people are not even sure there is a god, the question is not: "why no one cares?" The question is: "why anyone cares?" The few who do are concerned with the hope of church reunification; this requires a level of reciprocity and mutual respect.
In the sixteen hundreds life was different. Those few who questioned the existence of God, mostly, kept their heads down to keep their heads on. The question of re-baptism was a very serious matter, a matter of eternal life and death, a matter some were ready to die for and others to kill over.
When Christianity was the means of achieving eternal bliss and ease, baptizing a child insured she was going to heaven, probably by way of purgatory. Everyone was happy. Then along came someone quoting scripture and claiming infant baptism isn't worth the water it is written on. If they are right, everyone you have ever known who has died is not going to heaven and neither are you. Suddenly no one is happy. These people must be proven wrong and made to cease the vicious act of spreading their contrarian doctrines that threaten people's happiness and their immortal souls.
Now, if baptism's validity is solely a matter of a properly performed rite, irregardless of an inner experience or lack there of, then baptism is effective by virtue of the performance of the rite itself.
From a Roman Catholic stand point, according to a Catholic priest in my home town, proper form means she was baptized by a supposed Christian, (any Catholic can baptize in an emergency, and any baptized Christian is deemed Catholic even if he or she is also deemed a schismatic or a heretic) using the phrase "in the name of the Father the Son and the Holy Ghost."
If Luther is correct in saying the saving grace of Christ is by faith alone (sola fide), then, if one baptizes infants unto salvation, the unconscious response of a newborn must qualify as "faith."
It is a common doctrine that baptism is a once in a lifetime occurrence. This doctrine is found in the Westminster Confession and other like documents. Yet if a person's "baptism" is not valid, then, she is not "re-baptized" but given true baptism for the first time. On this point the Roman Catholic Church in both its orthodox and reformed incarnations and the Anabaptists in their multiple incarnations are, almost, in complete agreement.
The difficulty is: "What constitutes valid baptism?"
The Roman Catholic answer is: "baptism is valid if the rite is correctly administered." If the authority of the baptizer, and the actions performed, are proper then the baptism is valid. There is wide latitude and leeway inside the boundaries of what is acceptable to the Roman Catholic Church.
On the other hand the Anabaptist answer is: "when the person being baptized has not met the prerequisites of baptism (as found in the disputed verse Act 8:37 KJV, and elsewhere) then the baptism is invalid." When the party being baptized has no intention of undertaking the spiritual journey of death and resurrection symbolized in the rite, or when she is incapable of understanding the experience, then it is an empty ritual. Ritual without belief is meaningless.
Baptism, as taught by Anabaptists, is a public act of obedience following repentance from sin and the acceptance of Jesus Christ as Lord and Savior. Please note; this requires the recipient of baptism to have reached the age of accountability.
In the sixteen hundreds, the Anabaptists were condemned for re-baptizing because it brought the validity of infant baptism into question. They did not see it as re-baptism because to them infant baptism lacked validity. Today, even with the strict tradition of some of the Reformed Churches, demanding a communicant undergo confirmation of their infant baptism and make a good confession of faith before they are allowed to fully participate in all aspects of church fellowship, most of the Anabaptists still do not see any validity in infant baptism.
Of course, the Anabaptists would like all people to become A
nabaptists, but this is America, and everyone has the right to go to hell any way they wish. (Insistence on separation of church and state and the right of the individual to serve God according to her own understanding is another troubling idea the Anabaptist held during the reformation.)
Anabaptists are still, by Roman Catholic definition, schismatics and heretics. Also, the mostly Lutheran letter of protest sent to the second diet of Speier in the early fifteen hundreds, which caused the word Protestant to be coined, unequivocally states that Anabaptists should be executed without trial wherever and whenever found. Anabaptists did not and do not commonly practice re-baptism. For the most part they baptize into the body of Christ and are usually willing to recognize the value of valid baptisms other than their own. They baptize according to the teaching of the New Testament as they understand it in keeping with traditions which they claim are subordinate to the word of God.
Yes, that means Anabaptists still question the validity of infant baptism. Their cheerful willingness to baptize anyone who has reached the age of accountability and has made an acceptable profession of faith, whether they were formerly christened with water by another denomination or not, continues to be a contentious subject in the small puddle inhabited by those few who not only understand the question but actually care. It is quite a tempest in a baptistery even today. Thank God, it is no long a bloody tempest.
The Daily Beer
by Anette Pedersen
The Importance of Beer
Beer was food. Before the potato arrived in Northern and Central Europe, barley, rye and oats were the main sources of nutrients. Of these, barley was the easiest and most robust crop. Barley isn't that good as bread or porridge, so almost the entire harvest was brewed into beer. Beer was—and is—made from boiled water and grain. The unrefined products brewed at the time contained a large part of the grain's nutrients, much more so than the refined products of today.
Most meat and many vegetables were preserved by salting them in various ways, and the salty food meant that large amounts of liquid were needed by everybody. Water, however, was not safe to drink unless it was boiled first, and even boiled water would spoil if it stood around at room temperature for too long. So beer was both a nifty way for getting the nutrients from the barley and for preserving the boiled water with alcohol and various added herbs.
Beer was what everybody drank regardless of their age, sex and status. Not for its alcoholic content—in fact it was barely considered alcohol at all. Whenever people at the time spoke about drunkenness it was wine or spirits such as Aqua Vita they talked about. With neither clean water, tea, coffee, milk nor juice available to most people, you could easily drink six pints of beer a day and still be considered a sober teetotaller, by yourself and by your neighbors. For a farm-worker, eight pints per day were the norm, and four pints were the average for children in boarding schools.
Of course, most of the beer drunk was small beer with a very low alcoholic content. Also, beer was often cooked into dishes, which made the alcohol evaporate.
Brewing Beer
Beer may be brewed from any kind of grain. Barley was, and is, merely the most common. Wheat beer would be most common in the southern areas, where this grain thrived, while rye and oat beer served mainly as variations.
Most beer was, and is, flavored with hops. Hops are the dried flowers from a climber related to hemp. They grow in a zone from Italy to Denmark, with northern France and southern Germany as the best areas. If you could not grow your own hops, you could buy them from the itinerate hop-traders, or use various other herbs such as bog-myrtle and juniper berries instead. These additions were not just to help the taste. Most would also aid in preserving the beer. Keeping the beer from spoiling and turning sour was always a problem, so very little beer was brewed without some kind of attempt to prevent this, a task complicated by the lack of knowledge concerning bacteria, fungi and fermentation.
Brewing was done both as home-brewing and by professional brewers, but in either case the basic method was the same.
The first step was to soak the grain in water to make it ready for sprouting. In homes this would be done in a tub or barrel, but in breweries there would often be an outdoor soaking basin for this, where the sacks of grain would stay until completely soft. Usually this basin would be placed close to the wall, just below the malting and drying room in the attic. A pulley system was used to raise the grain directly from the basin and up to the next step in the process.
The second step was to spread out the grain to sprout and become malt. In private homes this could happen on trays placed on the rafters below the roof, but this frequent damping of the rafters wasn't good for the wood. If the household was big enough to have a room set aside for brewing, this might well be the sole room in the house with a floor covered with stone or tiles, just so the malting could take place there. In breweries there would certainly be at least one room with stone or tile floor. This room would often be in the attic, and it would have plenty of shuttered openings to let in fresh air and to control the humidity and temperature, while keeping out the sun.
Once the malt had sprouted to exactly the right stage—that is: root sprouts but no leaves sprouting—it had to be dried as fast as possible. If making white malt, this would happen on the floor with as much air blowing through as possible, often with men throwing the malt into the air to ensure an even drying. A faster and less space-demanding drying could happen in the fireplace, either in a box or on a tray placed above the fire, with or without a stone shielding it from below to keep it from roasting. This method gave the malt a smoky flavor, and it was very important that only the right kind of wood or coke was burned. Using oak or conifer wood would taint the flavor of the beer. In homes, the last heat in the oven after the weekly or monthly baking could also be used to dry the malt.
The fourth step was crushing the malt or grinding it coarsely, which could be done by hand for a small household. It would more often be done either at the professional mill or in a small farm mill by a local creek.
Next, the crushed malt would be mixed to a mash with warm water in a big tub, and allowed to stand until the "bran" or mash residue sank to the bottom. How much water to each measure of malt would determine how strong the beer would become, and thus how well it would keep. As there was no way to measure the alcohol content in the brewed beer, most towns and nations had laws concerning the maximum amount of beer that could be brewed from each measure of malt. This was partly to prevent unrest caused by swindled customers and partly to make it less attractive for the merchants to import a better quality of beer from abroad.
Once the mash residue had settled on the bottom, the liquid part, the wort—which would now contain the nutrients, starch and sugar of the grain—had to be sieved into the brewing-kettle. Some professional breweries had real sieves for this, but scalded bundles of straw were used just as often. The wort would be boiled in the kettle with hops and whatever else the brewer wanted to add to spice up the brew.
The mash residue would be mixed with water again and sieved to produce a second batch of wort. This was used to brew the weaker middle beer. The process was repeated for a third time, which would produce the weak and easily-spoiling small beer. Finally, the spent mash would be used for animal fodder.
After boiling with hops and the other flavorings, each batch of wort had to be cooled before the yeast could be added and the actual brewing take place. To prevent wild yeast from infecting and spoiling the brew, the cooling had to happen as quickly as possible. Big flat tubs or trays were used in breweries to cool the wort before transferring it to the fermenting tub. In private homes, the wort would usually be allowed to stand until it had cooled on its own. The phases of the moon or a silver coin in the tub was relied upon to preserve the beer from evil influences in these homes. A pair of trousers—especially from a male servant—draped over the tub was also believed to work to prevent spoilage.
Yeast would be saved from brew to brew, often as a yeast
-ring made of wooden spikes. This ring would be dipped into the fermenting brew and then dried and kept until the next brewing day. In breweries where new batches might be started several times a week, yeast could just be skimmed from a brew and kept damp in a jar.
When the wort was the temperature that the brewer thought was right, the yeast would be added. Within a few hours a layer of yeast would cover the surface of the tub, and the beer could be transferred to barrels where it would continue fermenting for a day or two.
The barrels could not be closed while the fermenting went on, due to the pressure that would build and to allow most of the floating yeast to bubble out. Once fermenting stopped, most commercial brewers would transfer the beer to fresh barrels to rid it of most of the sediment caused by the fermentation. This might or might not happen with home-brewed beer. The last dregs in a barrel could be extremely thick and murky when the beer was not transferred to a different barrel. At this stage, the beer would contain very little carbon dioxide and be quite flat by modern standards. Usually a bit of after-fermentation would take place after the barrels were closed.